Fletching Packages

Fletching Packages

2 Products

Set Descending Direction
per page
View as Grid List
  1. Dongs-Key Professional Fletching Set
    €149.99

    Dongs-Key Professional Fletching Set. 


    The Dongs-Key Professional Fletching Set is a perfect DIY toolkit for fletching vanes or feathers on the arrow shaft.


    What is included in the set:
    • Bitzenburger fletching Jig 
    • Small box cutter knife
    • Sanding pad of Scouring pad 
    • Acetone – cleaning (flammable) solvent
    • Glue - glue designed for fletching vanes & feather on aluminum, carbon, fiberglass & wood shafts

    How to fletch an arrow:

    1. Clean the shaft from old vanes/feathers, tape, wraps, glue, etc.
    2. Clean the shaft with the Acetone.
    3. Place the shaft in the fletching jig.
    4. Clean the groove of the vane/feather.
    5. Place the vane/feather in the fletching clamp.
    6. Put a little glue on the vane/feather. (cover the complete surface of the groove, but do not overdo)
    7. Place the clamp on the fletching jig against the shaft (applying slight pressure).
    8. Let it rest for a few minutes, so the vane can attach.
    9. Repeat the steps 4 to 8 for the 2nd and 3rd vane.
    10. Remove the arrow from the fletching jig.
    11. Put a small drop of glue at both ends of all the vanes/feathers.

    Do not use the arrow for the next 24h (glue needs to bind).
    (preferably store them separately, not in a tight quiver or arrow tube)

    After 24h your new fletched arrows are good to go.

    If you want to learn more about maintenance of your equipment, we kindly invite you to attend one of the workshops by Archery Learning Projects

    Archery Tech Team

    Learn More
  2. Dongs-Key Starter Fletching Set
    €49.99

    he Dongs-Key Starter set is an perfect kit to start fletching your own vanes ore feathers on the arrow shaft.

    What is included

    • Acetone 
    • Glue
    • Fletching Jig

    How to start fletching

    Clean the shaft, old vanes/feathers, tape, wraps, etc.
    Clean the shaft with Acetone ore alcohol
    Put the shaft in the fletching Jig
    Clean the vane/feather
    Place the vane/feather in the clamp
    Put a little glue on the vane/feather
    Place the clamp on the fletching jig on the shaft
    Let it rest for a few minutes
    Repeat the steps 4 to 8 for 2 times
    Take the arrow out the fletching jig
    Put on the ends of the vanes/feathers a small drop glu
    After 24 you can use the arrow

    If you want to know more please follow one of our workshops from Archery Learning Projects

    Archery Tech Team

    Learn More

2 Products

Set Descending Direction
per page
View as Grid List