Arrow Shafts

Easton Shaft Avance Sport 2021

About the product

Easton’s new Avance and Avance Sport 4MM arrows are an all-carbon target arrow intended to fit in the middle of the outdoor target archery market. Avance and Avance Sport share the same carbon construction and are then sorted into by straightness. The Avance has a +/- .003” straightness, ideal for intermediate level archers; and the Avance Sport carries a +/- .006” straight spec, ideal for novice level archers looking for lightweight performance in a less expensive arrow.

The Avance series is available in a wide selection of spine sizes that cover tuning ranges for recurve and compound archers over a broad range of bow styles, draw lengths and poundages. The durable, all-carbon construction of the Avance nets an arrow that is lighter than previous Easton offerings, allowing for top level performance and greatly benefiting the entry-level to intermediate-level target archer. Accompanying the Avance is a full line of glue-in target points, pin inserts, pin nocks and push in nocks.

Specs
4MM all-carbon target archery arrows
Avance 0.003 Inch straightness; Avance Sport 0.006 Inch straightness
Designed to offer high performance to entry-level and intermediate-level recurve and compound archers
Lighter weight than previous category arrows, Carbon One and Apollo
Available in 16 sizes from 340-2000

Archery Tech Team

Easton Shaft Avance 2021

About the product

Easton’s new Avance and Avance Sport 4MM arrows are an all-carbon target arrow intended to fit in the middle of the outdoor target archery market. Avance and Avance Sport share the same carbon construction and are then sorted into by straightness. The Avance has a +/- .003” straightness, ideal for intermediate level archers; and the Avance Sport carries a +/- .006” straight spec, ideal for novice level archers looking for lightweight performance in a less expensive arrow.

The Avance series is available in a wide selection of spine sizes that cover tuning ranges for recurve and compound archers over a broad range of bow styles, draw lengths and poundages. The durable, all-carbon construction of the Avance nets an arrow that is lighter than previous Easton offerings, allowing for top level performance and greatly benefiting the entry-level to intermediate-level target archer. Accompanying the Avance is a full line of glue-in target points, pin inserts, pin nocks and push in nocks.

Specs
4MM all-carbon target archery arrows
Avance 0.003 Inch straightness; Avance Sport 0.006 Inch straightness
Designed to offer high performance to entry-level and intermediate-level recurve and compound archers
Lighter weight than previous category arrows, Carbon One and Apollo
Available in 16 sizes from 340-2000

Archery Tech Team

Easton Shaft 6.5 mm Bowhunter Arrows

About the product

Hunting Accuracy for shooter confidence is the cornerstone of Easton 6.5 arrows. The 6.5 uses proprietary Acu-Carbon™ Uniform Spine process. The Acu-Carbon™ is a continuous-fed, single-die manufacturing method that results in the most reliable tolerance and eliminates the need for the spine-alignment and weight sorting. Easton’s Acu-Carbon™ production line produces the most consistent spine and weight from dozen to dozen and lot to lot, year in and year out. This benefits the bowhunter with truer flight and pinpoint accuracy in the field.

Easton, the top name in archery since 1922, has announced the new 6.5 hunting arrow line available now for immediate delivery. The Easton 6.5MM™ arrows are USA-made shafts that offer the highest level of accuracy available to bowhunters today, all at the price point to fit virtually any budget.

The Easton 6.5 includes NEW 6.5MM inserts that are made using a 4X-larger shoulder to add strength and boost valuable FOC. The 6.5 will also include Easton Microlite Nocks, which are designed to move the throat of the nock closer to the back of the arrow shaft. This makes the release more forgiving and further optimizes accuracy of the shot. Easton Microlite Nocks are 38% lighter to increase arrow velocity and add front-of-center weight forwarding to improve arrow flight.

Specifications
Bowhunter models come with Easton CB insert included.
Easton Microlite Nocks included, these shorten the critical distance between the shaft and bowstring for improved alignment and reduced weight.
Acu-Carbon™ Uniform Spine USA Manufacturing Process for the highest level of accuracy.
Available spine sizes: 300, 340, 400 and 500
Straightness: ± .006”.

For non-included but recommended parts/spare parts see the links down below
Easton 6.5MM Brass Insert
Easton 6.5™ Insert
Saunders Screw-in Points Combo 12 Pieces

More in this video

Archery Tech Team

Easton Shaft 6.5 mm Hunter Classic Arrows

About the product

Hunting Accuracy for shooter confidence is the cornerstone of Easton 6.5 arrows. The 6.5 uses proprietary Acu-Carbon™ Uniform Spine process. The Acu-Carbon™ is a continuous-fed, single-die manufacturing method that results in the most reliable tolerance and eliminates the need for the spine-alignment and weight sorting. Easton’s Acu-Carbon™ production line produces the most consistent spine and weight from dozen to dozen and lot to lot, year in and year out. This benefits the bowhunter with truer flight and pinpoint accuracy in the field.

Easton, the top name in archery since 1922, has announced the new 6.5 hunting arrow line available now for immediate delivery. The Easton 6.5MM™ arrows are USA-made shafts that offer the highest level of accuracy available to bowhunters today, all at the price point to fit virtually any budget.

The Easton 6.5 includes NEW 6.5MM inserts that are made using a 4X-larger shoulder to add strength and boost valuable FOC. The 6.5 will also include Easton Microlite Nocks, which are designed to move the throat of the nock closer to the back of the arrow shaft. This makes the release more forgiving and further optimizes accuracy of the shot. Easton Microlite Nocks are 38% lighter to increase arrow velocity and add front-of-center weight forwarding to improve arrow flight.

Specifications
6.5MM inserts are included, precision machined component has a four-times larger shoulder that strengthens the broadhead/arrow interface and boost FOC.
Easton Microlite Nocks included, these shorten the critical distance between the shaft and bowstring for improved alignment and reduced weight.
Acu-Carbon™ Uniform Spine USA Manufacturing Process for the highest level of accuracy.
Available spine sizes: 300, 340, 400 and 500
Straightness: ± .003”.

For non-included but recommended parts/spare parts see the links down below
Easton 6.5MM Brass Insert
Easton Inserts CB RPS
Saunders Screw-in Points Combo 12 Pieces  

More in this video

Archery Tech Team

Easton Shaft 6.5 mm Match Grade Arrows

About the product

Hunting Accuracy for shooter confidence is the cornerstone of Easton 6.5 arrows. The 6.5 uses proprietary Acu-Carbon™ Uniform Spine process. The Acu-Carbon™ is a continuous-fed, single-die manufacturing method that results in the most reliable tolerance and eliminates the need for the spine-alignment and weight sorting. Easton’s Acu-Carbon™ production line produces the most consistent spine and weight from dozen to dozen and lot to lot, year in and year out. This benefits the bowhunter with truer flight and pinpoint accuracy in the field.

Easton, the top name in archery since 1922, has announced the new 6.5 hunting arrow line available now for immediate delivery. The Easton 6.5MM™ arrows are USA-made shafts that offer the highest level of accuracy available to bowhunters today, all at the price point to fit virtually any budget.

The Easton 6.5 includes NEW 6.5MM inserts that are made using a 4X-larger shoulder to add strength and boost valuable FOC. The 6.5 will also include Easton Microlite Nocks, which are designed to move the throat of the nock closer to the back of the arrow shaft. This makes the release more forgiving and further optimizes accuracy of the shot. Easton Microlite Nocks are 38% lighter to increase arrow velocity and add front-of-center weight forwarding to improve arrow flight.

Specifications
6.5MM inserts are included, precision machined component has a four-times larger shoulder that strengthens the broadhead/arrow interface and boost FOC.
Easton Microlite Nocks included, these shorten the critical distance between the shaft and bowstring for improved alignment and reduced weight.
Acu-Carbon™ Uniform Spine USA Manufacturing Process for the highest level of accuracy.
Available spine sizes: 300, 340, 400 and 500.
Straightness: ± .001”.

For non-included but recommended parts/spare parts see the links down below

Easton 6.5MM Brass Insert
Saunders Screw-in Points Combo 12 Pieces   
Easton Inserts CB RPS

More in this video

Archery Tech Team

Easton Shaft Superdrive 19 G Uni Bushing Arrows

About the product

The new for 2020 Easton high-velocity SuperDrive 19 target arrow. The SuperDrive 19 is made with Easton’s SuperDrive carbon construction, the high-velocity SuperDrive 19 gives archers a lightweight, smaller diameter arrow choice that is ideally suited for 3D competition where wind could be a factor, as well as outdoor target archery and field archery, making it a great all-purpose outdoor competition arrow. The SuperDrive 19 features an adjustable stainless steel point system that allows a shooter to customize the setup from 90 to 200 grains (5.831-12.960 gram) with interchangeable weight modules. The SuperDrive 19 is available in three spine variations and suitable for most compound and recurve bow setups. The SuperDrive 19 joins the SuperDrive lineup that consists out of the SuperDrive 23, 25 and 27 shafts to round out the full lune of Easton large outside diameter carbon target shafts.

Specifications
Lightweight, all-carbon construction
Three spine sizes: 330-8.4 GPI, 380-7.8 GPI and 460-7.0 GPI
Straightness: ± .002
All-purpose outdoor competition arrow. Suitable for 3D, Field archery and Outdoor target archery.
90 grain base point adjustable up to 200 grains with interchangeable weight screws
Bushing or pin nock compatible

For non-included but recommended parts/spare parts see the links down below

SuperDrive 19 adjustable point
SuperDrive 19 4mm Bushing
SuperDrive 19 pin
Easton pin nock
Easton G pin Nock
Easton 4mm G Large groove Nock
Easton 4mm G Small groove Nock
Easton 4mm Microlite Nock
Adjustable point system

Archery Tech Team

Black Eagle Shaft Revelation

About the product

The REVELATION 3:20 100% carbon arrow was designed for long-range target accuracy. And after several years of product development, and Black Eagle professionals field testing this arrow, Black Eagle believes this is the best micro-diameter-target-shaft available. The Revelation’s heavy grains per inch and its surface area to mass ratio helps it slice through wind with ease, which helps minimize errand impacts caused by unpredictable windy conditions. Combine the above with the Revelation's unmatched tolerances and you have a winning combination that's capable of every arrow finding its place in the center of the bulls-eye. If standing on the top of the podium is your goal, the Revelation is the arrow that will help get you there!

The Black Eagle Revelation Arrow shaft is made out of High-Modulus Carbon and it’s Optimal use is Outdoor Target, Field and 3D.

The Revelation shaft comes included with Black Eagles Patent Pending Over-fit Pin Bushing.

Specifications
Straightness.001 inch.
Weight Tolerance1 ± grains.
Uncut Length ± 32.00”.
Comes included with Patent Pending Over-fit Pin Bushing.

For non-included but recommended parts/spare parts see the links down below
Black Eagle Points Revelation Stainless Steel 60 grain
Black Eagle Pin Bushing Revelation
Black Eagle Weight Collars Revelation 40 and 60 grain
Black Eagle Weight Collars Revelation 80 grain
Black Eagle Points Tungsten Revelation
Black Eagle Pin Nock

Archery Tech Team

Victory Shaft Carbon V-TAC 27 Sport 220

Leading Through Innovation
We are committed to maintaining our reputation as the leader in Innovative product design and composite materials technology. Our engineers are aerospace and composite material veterans that bring a new level of sophistication to the archery industry. Victory Archery is much more than an arrow company. We are a materials science think tank that’s constantly researching the potential of physical and chemical compounds to bring leading-edge products to the market first. Utilizing proprietary computer-aided design and exclusive carbon fiber materials technology, we have received numerous design and process patents. While other companies are repainting old arrow designs and renaming old products, Victory offers real innovation.

The V-TAC 27 melds the latest in carbon fiber weave technology with insight from Olympic gold medal archers and industry top professionals to create the most accurate, consistent, and forgiving arrows on the market. A true high-roller, this heavy 10.7 gpi shaft and 90° 3K carbon weave will steamroll the competition and have you counting by 10s.

• Spine aligned. Every arrow digitally spine for increased accuracy and shot to shot consistency
• Matched weight. Each dozen weight matched to +- 0.5 Grain for precise shot consistency and tighter grouping
• Large diameter arrow. 0.370 High modulus 100% carbon fiber construction. 0,421 OD for unparalleled accuracy with line cutting abilities. 
• Ice Nano ceramic coating. Advanced nano ceramic arrow coating improves penetration and allows for easy removal from targets

What is in the package
• 12 shafts
• 12 unibushing 25 grain
• 12 F-Nocks 6 grain

Specifications

• Spine 220
• GPI 10.7
• Stock length 31 Inch
• ID 0.370 Inch
• OD 0.420 Inch
• Shaft straightness 0.001 for Elite, 0.003 for gamer, 0.006 for sport

Archery Tech Team

Victory Shaft Carbon V-TAC 27 Gamer 220

Leading Through Innovation
We are committed to maintaining our reputation as the leader in Innovative product design and composite materials technology. Our engineers are aerospace and composite material veterans that bring a new level of sophistication to the archery industry. Victory Archery is much more than an arrow company. We are a materials science think tank that’s constantly researching the potential of physical and chemical compounds to bring leading-edge products to the market first. Utilizing proprietary computer-aided design and exclusive carbon fiber materials technology, we have received numerous design and process patents. While other companies are repainting old arrow designs and renaming old products, Victory offers real innovation.

The V-TAC 27 melds the latest in carbon fiber weave technology with insight from Olympic gold medal archers and industry top professionals to create the most accurate, consistent, and forgiving arrows on the market. A true high-roller, this heavy 10.7 gpi shaft and 90° 3K carbon weave will steamroll the competition and have you counting by 10s.

• Spine aligned. Every arrow digitally spine for increased accuracy and shot to shot consistency
• Matched weight. Each dozen weight matched to +- 0.5 Grain for precise shot consistency and tighter grouping
• Large diameter arrow. 0.370 High modulus 100% carbon fiber construction. 0,421 OD for unparalleled accuracy with line cutting abilities. 
• Ice Nano ceramic coating. Advanced nano ceramic arrow coating improves penetration and allows for easy removal from targets

What is in the package
• 12 shafts
• 12 unibushing 25 grain
• 12 F-Nocks 6 grain

Specifications

• Spine 220
• GPI 10.7
• Stock length 31 Inch
• ID 0.370 Inch
• OD 0.420 Inch
• Shaft straightness 0.001 for Elite, 0.003 for gamer, 0.006 for sport

Archery Tech Team

Victory Shaft Carbon V-TAC 27 Elite 220

Leading Through Innovation
We are committed to maintaining our reputation as the leader in Innovative product design and composite materials technology. Our engineers are aerospace and composite material veterans that bring a new level of sophistication to the archery industry. Victory Archery is much more than an arrow company. We are a materials science think tank that’s constantly researching the potential of physical and chemical compounds to bring leading-edge products to the market first. Utilizing proprietary computer-aided design and exclusive carbon fiber materials technology, we have received numerous design and process patents. While other companies are repainting old arrow designs and renaming old products, Victory offers real innovation.

The V-TAC 27 melds the latest in carbon fiber weave technology with insight from Olympic gold medal archers and industry top professionals to create the most accurate, consistent, and forgiving arrows on the market. A true high-roller, this heavy 10.7 gpi shaft and 90° 3K carbon weave will steamroll the competition and have you counting by 10s.

• Spine aligned. Every arrow digitally spine for increased accuracy and shot to shot consistency
• Matched weight. Each dozen weight matched to +- 0.5 Grain for precise shot consistency and tighter grouping
• Large diameter arrow. 0.370 High modulus 100% carbon fiber construction. 0,421 OD for unparalleled accuracy with line cutting abilities. 
• Ice Nano ceramic coating. Advanced nano ceramic arrow coating improves penetration and allows for easy removal from targets

What is in the package
• 12 shafts
• 12 unibushing 25 grain
• 12 F-Nocks 6 grain

Specifications

• Spine 220
• GPI 10.7
• Stock length 31 Inch
• ID 0.370 Inch
• OD 0.420 Inch
• Shaft straightness 0.001 for Elite, 0.003 for gamer, 0.006 for sport

Archery Tech Team

Easton Shaft T64 FMJ Arrows

About the product

Arrow penetration is vital when it comes to successful big game hunting, yet without precise shot placement, maximizing penetration alone may not seal the deal. Now, Easton came with a new answer to this question from bowhunters. The T64 Full Metal Jacket, the tapered arrows that combine maximum killing power with the highest level of FOC accuracy.

The T64 FMJ shaft profile begins at the front with a 6mm diameter that seamlessly tapers down to a micro-diameter 4mm at the nock end. The integrated front-of-center weight distribution that adds up to 30% more FOC without adding point weight for the best in exacting long-range accuracy. For lethal big game results, the rear taper creates a reduced-friction path for maximum penetration. Couple these new improvements with FMJ’s track record of field-proven success, and the Easton T64 now sets the new arrow shaft benchmark for bow hunting big game.

Specifications
Straightened to the highest industry specifications and is coaxially aligned to ± 3 milliradians to produce the most precise hunting arrow available today.
Built-in FOC, front taper adds up to 30% more FOC,.
Available in two deflection factor sizes that cover the full range of arrow spines from 400 through 300 and shaft lengths from 26” to 32”.
Comes included with 4mm Microlite nock and T64 RPS insert

For non-included but recommended parts/spare parts see the links down below
Saunders Screw-in Points Combo 12 Pieces   

More in this video

Archery Tech Team