Bow Tuning

Beiter Limbs Line Gauge 2 Pieces

About the product

The Beiter LIMB-LINE-GAUGE

Beiter Limb Line Gauges are a simple and effective precision tool for the tuning of bows. With the aid of Beiter Limb Line Gauges you can check the arrow position on the bow and with respect to the position of the Sight Tunnel and the limbs, the so-called center-shot.

You can find

The arrow position in the bow-window.

The center-shot, that means the correspondance of the arrow position in respect to the position of the sight tunnel and the limbs.

The position and straightness of the limbs.

The alignment of the limbs with the handle.

How works this product

All ILF and Formula Recurve Systems

To find the Center Shot of your bow
Clip your Limb Line Gauges one on the upper and one on the lower limb, as close as possible to the handle. Than place the bow so that you have a view straight behind it. Now try to see the bowstring between the two lines of the Limb Line Gauge. You will notice, how far the Sight Tunnel respectively the arrow will be off-set the center line. Now you have a starting point for the tuning of your bow.

Is your handle straight?
Clip your Limb Line Gauges one on the upper and one on the lower limb, as close as possible to the handle. Than place the bow so that you have a view straight behind of it. Try to see the string between the lines on both Limb Line Gauges. If you are not able to do this, because the string is not within the lines, than there are two main
reasons for it. First, your riser/handle is bent or not straight. Second, the pockets on your bow are not aligned correctly.

To control the straightness of your limbs
Clip your Limb Line Gauges one on the upper and one on the lower limb, as close as possible to the end of the limb. The best would be to add to more Limb Line Gauges (total of 4) as close as possible to the handle. Than place the bow so that you have a view straight behind of it. Try to see the string between the lines on both Limb Line Gauges. If you are not able to do this, because the string is not within the lines, than there are three main reasons for it. First, your riser/handle is bent or not straight. Second, the pockets on your bow are not aligned correctly. Third, the limbs are not straight.

Archery Tech Team

Dongs-Key Tru Center Gauge

About the product

The tru center gauge has simple looks, but it works fast and very effective to set the arrow rest “tru center”.

True center means, the correct alignment of your nock, sight and arrow rest without a center-shot gauge is difficult. The Tru-Center gauge simplifies tuning your bow after installing any arrow rest or sight. Centershot alignment is absolutely necessary to insure proper arrow flight.

The Tru Center Gauge, this is a handy tool little tool from Archery Service Center that you can use to check for a true center shot. With this, simple device, you set your true center in less than ten minutes.

It is built to last a lifetime out of anodized aircraft grade aluminum and stainless steel.

It is an must have product for every archery toolbox.

Dead Center Pro Bow Balancer

About the Product

Accuracy Matters. Precision Matters. Balance Matters

Precision is never close enough, not hope and guess, but actually having a tool to indicate a bow's balance bias to properly adjust and tune - That's Precision. World renowned archery coaches, professional archers, pro shops and avid archers world wide Choose the Pro Bow Balancer because Precision Balance Does Matter.

The Pro Bow Balancer from Dead Center Archery Products is a revolutionary tool to take the guess work out of stabilizer and weight configuration and eliminates the notion of "Close Enough". Proper balance Does Matter when it comes to putting arrows where you want them. If you want to make your stabilizers work For you not Against you, have an optimum aiming experience for better shot execution, stability during the shot and more arrows on target, you need precision balance.

Want to know more? See below

View the Pro Bow Balancer Video and Read the full Pro Bow Balancer Instructions.

Read the Stabilization Setup FAQ answered by world Champion Archer and International Archery Coach - Larry Wise

Archery Tech Team

Triple Trouble Clicker Locking Tool

About the Product

Use this tool to really tighten your Beiter clicker to your riser.
Never have any creep on your clicker position again.

Archery Tech Team

Win&Win Tool for limb Adjustment for Kap Win & Win Handles Archers Corner Tuning

OMP TruCenter 2.0 Laser Aligner

Provides rapid references for cam, arrow rest and center shot alignment. Can be quickly attached with the toolless knobs on both right and left hand risers. Constructed to withstand the rigors of pro shop use.

Built-in level
Pivoting body design
3mW red laser
Easily converts from RH to LH
Toolless adjustments

see how Its works

Archery Tech Team

Brite Site 3rd Axis Leveler 

The 3rd Axis Leveler by Brite Site allows 2nd and 3rd axis sight levelling for accurate shooting in uneven terrain. Works with target and hunting sights. Portable design can be used on any surface without the need to bolt it down. Compensates for up and down hill shooting accuracy. The Brite Site 3rd Axis Leveller features a built-in level and adjusting screw.

A must-have for levelling your sight
Allows you to adjust both 2nd & 3rd axis on any sight or scope set up
Works with hunting and target sights
Has built-in level and adjusting screw
Compact design means you can use it anywhere
2nd and 3rd axis levelling
No need to clamp to a table
Portable design but sturdy
Easy to use
Works on any surface
Superbly made, anodised aluminium body
Fully illustrated instructions included
Red body, black platform
Made in USA
Brite Site, Archery Innovation since 1977

Watch the instruction video here

Archery Tech Team 

Beiter Limb Line Gauge Plus set

About the product

Beiter Limb Line Gauges are a simple and effective precision tool for the tuning of the bows. With the Beiter Limb Line Gauges you can check the arrow position on the bow, the position of the Sight Tunnel, the limb straightness and the center-shot. ASC Tech Team Tip on most Recurve Bows is the center shot around 25/64 Inch = 9,93 Mm. Beiter Limb Line Gauges are definitely an indispensable tool for every archer! With the updated fluor yellow band of 2Mm it is the Limb Alignment more easy to see.

Specifications
Material Molded Plastic & rubber band

More in the video

Archery Tech Team